yourself.

The first thing to do prior to carrying out this AC fix is to find out which brand of refrigerant that your vehicle is using. This information is available in your owner’s manual or underneath the hood. The tag on the hood will read “R-134A” It is the most popular refrigerant.

The next step after having decided which type of fuel to use in your vehicle is to go to the garage and search for it. There are plenty of auto parts stores and department stores sell bottles of the product. The customer may be required to provide your ID when buying it However, you shouldn’t view this as a personal injury.

Here are a few easy steps for recharging your vehicle’s AC system. The procedure might be different in certain vehicles.

1. Make sure to turn on your AC

The air conditioner should be adjusted to its maximum setting.

2. Be sure to check the engagement of your compressor.

Check your hood by lifting it up to look the pulley which connects with your AC compressor. If it’s spinning, it’s most likely to be working properly.

3. Do a Pressure Check

For a pressure test it is necessary to switch off the engine and search for a low-side pressure service port. Locate it in the engine bay on the passenger’s side. You may see it in gray, black or both.

4. The Recharge Kit also includes the Hose.

Next, connect the hose with the recharge kit. Make sure not to push your trigger to start the refrigerant container yet. Instead, you should attach the tube. There must be a gauge attached to it.

5. Turn off the engine and check the gauge

To determine the level of pressure, turn off your engine and check the gauge off. It is recommended to charge your vehicle as soon as the pressure is lower than 40 PSI.

6. Release the Trigger

Connect to your refrigerator

6u6nwx8539.